View HI82T0125W10DE_9064251.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(hi82) ultra - precis ion high voltage film resistors token electronics industry co., ltd. taiwan: no.137, sec. 1, zhongxing rd., wugu district, new taipei city, taiwan, r.o.c. 24872 t el : +886 2981 0109 f ax : +886 2988 7487 china: 12f, zhong xing industry bld., chuang ye road, nan shan district, shen zhen city, guang dong, china 518054 tel : +86 755 26055363; fax : +86 755 26055365 web: www.token.com.tw mailto:rfq@token.com.tw version: november 22, 2017
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 1 / 10 ? product introduction (hi82) family members: ? (hi82d) precision high - voltage high - value resistor series, resistance range from 1m to 10t, precision tolerance from 30% to 0.25%, rated power has 1w/1.2w/3w selectable. ? (hi82h) conventional precision high - voltage high resistance resistor series, variou s precision tolerance 1%/2%/5%/10%/20%/30%/50% available, four kinds of rated power 0.5w/0.7/1w/2w selectable, resistance from 1m to 1t. ? (hi82t) high power voltage resistor series, maximum operating voltage up to 35kv, 30w high rated power to 0.125w, re sistance range from 1 to 500m, tolerance range 0.5% to 5%. features : ? high voltage thick film precision technology resistor. ? resistance up to 10t. low tcr, low vcr. ? radial leads, variable lead spacing by bending. ? climatic protection by silicone co ating applications : ? impulse voltage generators, ? arc furnace damping, energy research, ? pulse modulators, radar pulse - forming networks, ? capacitor crowbar circuits, high voltage snubber circuits, the high performance high - voltage applications require the use of high voltage resistors in applications with long - term stability and good temperature coefficient. token electronics has introduced ultra - stable high - precision hi82 high voltage resistors to meet these needs. token's unique precision full film and serpentine transfer pattern (serpentine patterns design), using a specifical high speed fine - line thick film dispensing system, developed a series of high voltage application resistor components with excellent performance.especially in smaller si zes and higher resistance - value components. through the use of alloy ruthenium paste material, and 95% high aluminum planar ceramic chip, token can control the manufacture of very precise precision and stabilize the performance parameters of important hig h - voltage operating temperature range. (hi82) thick film resistor combined with close tracking design, with low current noise, linear current voltage, low tcr, high temperature durability, wide resistance range, long - term stability, and low - cost advantages . token hi82 ultra - precision high - voltage resistors conform with rohs and lead - free standards and provide more competitive prices and fast delivery service. for technical specifications and special applications, please contact yo ur token's sales representative , or l ink to token official website " high voltage resistors " to get more information. up to 10t, (hi82) sets a new standard for high value, ultra - stable precision high voltage resistors.
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 2 / 10 ? dimensions composition structure (hi82) membrane material (a) ruthenium paste base material (b) 95% aluminum oxide, al 2 o 3 encapsulating material (c) high temperature silicone resin
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 3 / 10 ultra - precision high value voltage resistor dimensions (unit: mm) hi82d ultra - precision high - voltage high - value resistor part number l 1mm h 1mm t 0.5mm p 2mm i 3mm d 0.1mm hi82d - 1w 30.0 6.0 1.4 27.5 20 0.4 hi82d - 1bw 40.0 6.0 1.4 37.8 20 0.4 hi82d - 3w 50.0 12.5 1.4 47.8 20 0.4 note: l = length, h = width, t = thickness, i = length of steel wire, d = wire diameter p = standard lead spacing ( other spacing possible by bending ) hi82h conventional precision high - voltage high - resistance resistor part number l 1mm h 1mm t 0.5mm p 2mm i 3mm d 0.1mm hi82h - 05w 3.2 2.5 0.9 2.0 20 0.4 hi82h - 07w 3.8 5.0 1.0 2.5 20 0.4 hi82h - 1w 6.3 3.5 1.0 5.5 20 0.4 hi82h - 2w 10.2 5.1 1.0 9.5 20 0.4 note: l = length, h = width, t = thickness, i = length of steel wire, d = wire diameter p = standard lead spacing ( other spacing possible by bending ) hi82t high - power voltage resistor part number l 1mm h 1mm t 0.5mm p 2mm i 3mm d 0.1mm hi82t - 0125w 8 3.5 2 5.7 10 0.6 hi82t - 025w 10 5 2 7.7 10 0.6 hi82t - 04w 25 5 2 22.5 20 0.6 hi82t - 05w 35 5 2 32 20 0.6 hi82t - 1w 30 8 2 27 20 0.6 hi82t - 2sw 25 10 2 22 20 0.6 hi82t - 2nw 22 18 2 19 20 0.6 hi82t - 2bw 45 10 3 41.5 20 0.8 hi82t - 3w 60 10 3 56.5 20 0.8 hi82t - 5w 80 20 4 76.5 40 1.0 hi82t - 10w 97 23 4 93.5 40 1.0 hi82t - 20w 100 35 4 96.5 40 1.0 hi82t - 30w 100 48 4 96.5 40 1.0 note: l = length, h = width, t = thickness, i = length of steel wire, d = wire diameter p = standard lead spacing ( other spacing possible by bending ) ultra - precision high value voltage resistor dimensions (unit: mm)
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 4 / 10 ? hi82d electrical charcs. technical characteristics - (hi82d) part number power rating p 70 (w) working voltage max. (v) resistance range () tolerance (%) tcr (1) (ppm/ ) vcr (2) (ppm/v) hi82d - 1w 1.0 10kv 1m - 100m 0.25/0.5/5/10 25/50/100 2ppm/v 100m - 1g 1/2/5/10/20 50/100/250 5ppm/v 1g - 100g 5/10/20/30 250/500 20ppm/v 100g - 1t 5/10/20/30 500/1000 100ppm/v hi82d - 1bw 1.2 20kv 1m - 100m 0.25/0.5/5/10 25/50/100 1ppm/v 100m - 1g 1/2/5/10/20 50/100/250 2ppm/v 1g - 100g 5/10/20/30 250/500 10ppm/v 100g - 1t 5/10/20/30 500/1000 50ppm/v hi82d - 3w 3.0 30kv 1m - 100m 0.25/0.5/5/10 25/50/100 1ppm/v 100m - 1g 1/2/5/10/20 25/50/100 1ppm/v 1g - 100g 5/10/20/30 100/250 5ppm/v 100g - 1t 5/10/20/30 250/500 25ppm/v 1t - 10t 10/20/30 500/1000 100ppm/v note: (1) tcr 25/50: temperature range +25 (2) the voltage coefficient is measured between 10v and 100v. operating voltage = ( ? ? ? ) , or max. operating voltage listed in above table whichever is lower. optional specifications on request. environmental characteristic continuous operating volta ge v = ( p ? r ) , or max. operating voltage listed in above table whichever is lower. measuring voltage standard measuring voltage is 10v (50v for values >1g). different voltages on request. tcr ppm/ temperature range +25 ~ +125 tcr25/50 values above 1g: +25 ~ +85 . operating temp. range - 55 ~ +125 climatic category to en 60068 - 1 55/125/56 humidity - /contact protection lacquer coating. resistant to most solvents. isopropyl alcohol recommended for cleaning; do not use acetone or methy lene choloride. avoid mechanical stress to coating. stability: storage 125 /1000hrs 10g >10g <1% <2% stability at max. voltage/1000hrs 10g >10g <1% <2%
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 5 / 10 ? hi82h electrical charcs. technical characteristics - (hi82h) part number power rating p 70 (w) working voltage max. (v) resistance range () tolerance (%) tcr (1) (ppm/ ) vcr (2) (ppm/v) trimmed untrimmed hi82h - 05w 0.5 300 1000 1m - 100m 1/2/5/10 tc25/50/100 <50ppm/v >100m - 500m 2/5/10/20 tc50/100/250 <100ppm/v >500m - 1g 5/10/20 tc100/250 <100ppm/v >1g - 10g 5/10/20/30 tc250/500 <500ppm/v >10g - 100g 5/10/20/30 tc500/1000 <1000ppm/v >100g - 1t - - - hi82h - 07w 0.7 300 500 1m - 100m 2/5/10 tc50/100 <50ppm/v >100m - 500m 5/10/20 tc100/250 <100ppm/v >500m - 1g 5/10/20 tc100/250 <100ppm/v >1g - 10g 10/20/30 tc250/500 <500ppm/v >10g - 100g 10/20/30 tc500/1000 <1000ppm/v >100g - 1t - - - hi82h - 1w 1.0 1200 2500 1m - 100m 1/.../10 tc25/50/100 <10ppm/v >100m - 500m 1/2/5/10/20 tc25/50/100 < 25ppm/v >500m - 1g 1/2/5/10/20 tc100/250 <25ppm/v >1g - 10g 2/5/10/20 tc100/250 <100ppm/v >10g - 100g 5/10/20/30 tc250/500 <250ppm/v >100g - 1t 10/20/30/50 tc500/1000 <500ppm/v hi82h - 2w 2.0 4000 6000 1m - 100m 1/.../10 tc25/50/100 < 5ppm/v >100m - 500m 1/2/5/10/20 tc25/50/100 <10ppm/v >500m - 1g 1/2/5/10/20 tc25/50/100 <10ppm/v >1g - 10g 2/5/10/20 tc50/100 <25ppm/v >10g - 100g 5/10/20/30 tc100/250 <100ppm/v >100g - 1t 5/10/20/30 tc250/500 <250ppm/v note: (1) tcr 25/50: temperature range +25 (2) the voltage coefficient is measured between 10v and 100v. operating voltage = ( ? ? ? ) , or max. operating voltage listed in above table whichever is lower. optional specifications on request. environme ntal characteristic continuous operating voltage v = ( p ? r ) , or max. operating voltage listed in above table whichever is lower. measuring voltage standard measuring voltage is 10v (50v for values >1g). different voltages on request. tcr ppm/ temperature range +25 ~ +125 tcr25/50 values above 1g: +25 ~ +85 . operating temperature range - 55 ~ +125 climatic category to en 60068 - 1 55/125/56 humidity - /contact protection lacquer coating. resistant to most solvents. isopropyl alcohol recommended for cleaning; do not use acetone or methylene choloride. avoid mechanical stress to coating. stability: storage 125 /1000hrs. 1g 10g >10g <1% <2% <5% stability at max. voltage/1000hrs. 1g 10g >10g <0.5% <1% <2%
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 6 / 10 ? hi82t electrical charcs. technical characteristics - (hi82t) part number power rating p 75 (w) working voltage max. (v) resistance range () tolerance (%) tcr hi82t - 0125w 1/8w 2kv 1 ~ 500m 0.5% ~ 5% 100ppm/ hi82t - 025w 1/4w 4kv 1 ~ 500m hi82t - 04w 2/5w 10kv 1 ~ 500m hi82t - 05w 1/2w 15kv 1 ~ 500m hi82t - 1w 1w 15kv 1 ~ 500m hi82t - 2sw 2w 20kv 1 ~ 500m hi82t - 2nw 2w 20kv 1 ~ 500m hi82t - 2bw 2w 20kv 1 ~ 500m hi82t - 3w 3w 25kv 1 ~ 500m hi82t - 5w 5w 30kv 1 ~ 500m hi82t - 10w 10w 35kv 1 ~ 500m hi82t - 20w 20w 35kv 1 ~ 500m hi82t - 30w 30w 35kv 1 ~ 500m note : tcr @25 operating voltage = ( ? ? ? ) , or max. operating voltage listed in above table whichever is lower. optional specifications on request. environmental characteristic continuous operating voltage v = ( p ? r ) , or max. operating voltage listed in abo ve table whichever is lower. measuring voltage standard measuring voltage is 10v (50v for values >1g). different voltages on request. tcr ppm/ temperature range +25 ~+105 tcr 25/50 values above 1g: +25 ~+105 . operating temperature range - 55 ~ +225 climatic category to en 60068 - 1 55/125/56 insulation withstand voltage 1000vdc insulation resistance 10g humidity - /contact protection lacquer coating. resistant to most solvents. isopropyl alcohol recommended for cleaning; do not use acetone or methylene choloride. avoid mechanical stress to coating. stability: storage 125 /1000hrs. 1g 10g >10g <1% <2% <5% stability at max. voltage/1000hrs. 1g 10g >10g <0.5% <1% <2%
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 7 / 10 ? power derating curve power derating curve - (hi82d & hi82h) power derating curve - (hi82t)
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 8 / 10 ? advance technique advance technique of non - inductive & serpentine pattern (hi8 2 ) non - inductive performance: ? h i8 2 non - inductive design which uses a serpentine resistive pattern that offers for zigzagging lines to carry current in opposite directions, thereby achieving maximum neutralization of flux fields over the entire length of the resistor. ? this efficient non - in ductive construction without derating of any performance advantages is ideal for applications where high frequency is required. serpentine pattern screen printing design: ? type high voltage h i8 2 precision resistors combine token's non - inductive serpentine p attern, high thru - put screen printed silicone coating. ? the alignment of the gap in the serpentine resistor pattern with the gap in the coating pattern provides a complete encapsulation of the resistor element. ? the cap and lead assemblies are pressed onto the resistor core, finishing the resistor and providing rugged terminal attachment.
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 9 / 10 ? order codes order codes (hi82d) - ultra - precision high - voltage high value resistors hi82d 1w 1g f e part number hi82d rated power (w) 1w 1.0w 1bw 1.2w 3w 3.0w resistance value () 1m1 1.1m 110m 110m 1g5 1.5g 10g 10g resistance tolerance (%) c 0.25% d 0.5% f 1% j 5% k 10% m 20% n 30% tcr (ppm/ ) c 25ppm/ d 50ppm/ e 100ppm/ l 250ppm/ i 500ppm/ r 1000ppm/ order codes (hi82h) - conventional precision high - voltage high - resistance resistors hi82h 2w 1g f e part number hi82h rated power (w) 05w 0.5w 07w 0.7w 1w 1.0w 2w 2.0w resistance value () 1m1 1.1m 110m 110m 1g5 1.5g 10g 10g 1t 1t resistance tolerance (%) f 1% g 2% j 5% k 10% m 20% n 30% tcr (ppm/ ) c 25ppm/ d 50ppm/ e 100ppm/ l 250ppm/ i 500ppm/ r 1000ppm/ order codes (hi82t) - high - power voltage resistors hi82t 30w 500m f e part number hi82t rated power (w) 0125w 1/8w 04w 2/5w 2bw 2w 10w 10w 30w 30w resistance value () 10 10 1m1 1.1m 110m 110m 500m 500m resistance tolerance (%) d 0.5% f 1% j 5% tcr (ppm/ ) e 100ppm/ c5 15ppm/ on request note: if no requirements for tcr, (hi82d), (hi82h) and (hi82t) measuring voltage and taping are given, the standard value(highest value in table) will be supplied, measuring voltage of 10v.
http://www.token.com.tw rfq@token.com.tw taiwan factory : +886 2 29810109 china factory : +86 755 26055363 page: 10 / 10 ? general information cost effective complete selection of high voltage components token high voltage series can be specified for use in industrial and general purpose high voltage systems, as well as a complete selection of high resistance, hi - meg, high - voltage, high frequency, and bulk ceramic resistors for higher average power dissipa tion. these high resistance, high frequency, high resistance resistors combine the proven performance of token resistance system with new cost efficient design elements and high voltage applications. detailed specifications, both mechanical and electrical , please contact our sales representative for more information. high voltage applications resistors produced from serpentine pattern screen printing design or bulk ceramic materials have displayed several key advantages in demanding high - voltage situation s, including both continuous - wave and pulse applications. these include radar and broadcast transmitters, x - ray systems, defibrillators, lasers, and high - voltage semiconductor process equipment applications, where resistors must handle peak voltage anywher e from 8kv to 75kv. typical applications include current limit in capacitor charge/discharge, crowbar, and tube - arc circuits. in these uses, bulk ceramic resistors provide low inductance, high average power per unit size, stability at high voltage, and dur ability at extreme peak - power levels. film resistors typically cannot withstand high - voltage pulse applications. rf/digital loads and high - frequency applications token non - inductive voltage resistors are used extensively for high - frequency rf loads in bro adcast and communication equipment because of their non - inductive characteristics. they provide excellent non - inductive power - handling capacity at frequencies up to the gigahertz range, with no sacrifice in power dissipation. film resistors may provide th e needed non - inductive characteristics required by such rf applications, but they have size limitations and present reliability problems due to potential film burnout. this is especially true in advanced digital applications such as digital radio and tv tr ansmitters involving pulses at high frequencies. application notes ? due to the high voltage which can appear between the end cap and any adjacent metal part, resistors should be mounted at an adequate distance from other conductors. ? an appropriate number o f resistors may be screwed together as a stick to provide an assembly which will be capable to withstanding any desired voltage, providing no individual resistor is subject to a greater stress or power dissipation than is recommended in its data sheet, and that appropriate anticorona devices are fitted. ? the axial termination should not be bent closer than twice the diameter of the terminal wire from the body of the resistor. when resistors are required to be potted, the preferred encapsulant is a silicone compound. oil immersion for some high voltage applications it is required to immerse the components in oil or gas to reduce the effects of corona and surface tracking. a special lacquer protected version of the resistor is available, suitable for immersi on in transformer oil or sf6.

▲Up To Search▲

Price & Availability of HI82T0125W10DE

	To Download HI82T0125W10DE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .